Detailed Product Description

We can produce epoxy/polyester mixed, pure polyeste, pure epoxy art type powder coating. Can be used on indoor, outdoor and metal surface that need special effection.

Product Series 

Sand grain, hammer grain, silk grain, net grain, marble grain, metallic and so on.

Physical properties of the powder

Density 1.2 1.8 different due to the color and glossy

Granularity distribution:  100 below 100 micronsDetail data due to the art effection you need; It can be adapted to the customers

Flow ability: 24 27

Curing condition

180 200 Material temperature, 15 minute.

Coating performance

Average coating rate of Powder Coating

8-10 /,film thickness 70 microns (calculated according to 100 consuming of powder coating)

Suggestion film thickness

60-90 microns (according to the operating method).

Packing of Powder Coating

Double-deck polyethylene inside lining carton; 20kg/carton

Storage

The products should be stored in ventilated dry and clean room with the temperature below 30. Not to be close to fire and heat and kept out direct sunlight. Outdoor stacking is prohibited. On the conditions mentioned above, the products can be stored stably for 6 months. The product beyond pot limit should be reexamined, and it can still be used if the inspection results past muster.

Avoid inbreathing dust when using the products though the powder coatings are nontoxic. The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible.

Notice

This technical date is only for user reference, the concrete index is to measure incomes under the terms of Suring ,in case of the problem can not be solved, please contact the technology department of our factory.

We have the best price and quality in the market!